CNC Dust Collection part 1. I have been needing to build a dust collection hook up for the CNC machine. In this project I used a modified version of the dust shoe that is on CNC Router Parts web-page. With the help of Nathan at CNC Router Parts, we made a design for a dust shoe with two 4" flexible hose connections. My hope was that with suction from two 4” hoses, I could get away without using the brush attachment. But I have found that the brush helps greatly in catching the dust and helping it up into the dust hoses.
dust shoe: http://www.cncrouterparts.com/parametric-dust-shoe-p-396.html
Plastic used: HDPE - High-density polyethylene
Some of the tools used in this project
Cantilever Clamps: http://amzn.to/1TJmAFx
Milwaukee 18-volt Compact Drill: http://amzn.to/1sj855F
Whiteside Spiral Bit with Up Cut Solid Carbide 1/2-Inch Diameter: http://amzn.to/1TJmHRj
Yonico Ball Nose 1/4-Inch Router Bit :http://amzn.to/2mjskNS
Flexible Brush: http://amzn.to/2qBN8lC
FastCap Glu-Bot Glue Bottle: http://amzn.to/1TJn0vq
3M Peltor H10A Optime 105 Earmuff: http://amzn.to/1sj80iw
3M Reusable Respirator: http://amzn.to/2cGwyPL
3M Particulate Filter P100: http://amzn.to/2bYwhaK
To see upcoming projects follow me on social media
Tags: CNC Dust Collection part 1, Woodworking, DIY, CNC router, CNC, CNC wood router, CNC machine, Dust Collection, 3d, 3d map, 3d topography, Fusion 360
In this part of the story, I connect a 6 inch dust collection line from the dust collector to the CNC spindle. I am taking a lot of care to make sure the transitions in the pipe are as smooth and sweeping as possible in order to keep the airflow up. I hav...
-Support the channel and head over to my website to buy merchandise and other goods: https://andyrawls.com
-Direct link to merchandise here: https://www.bunkerbranding.com/collections/andy-rawls
- Instagram: https://www.instagram.com/ar_t...
I have installed of a 2500 gallon rainwater storage tank on the shop. I built a pad by digging out a hole and placing compacted gravel in that space. I put in a layer of 3/4 inch pressure treated plywood on top of the gravel. This is what the tank will ...
**This product was updated in 2016 to the current Benchtop PRO revision as shown in the current assembly video https://youtu.be/ZUNpi0lTg5c**
The team at CNC Router Parts (www.cncrouterparts.com) present a step-by-step assembly of the Benchtop PRO CNC ma...
I built a large dust collector a while ago for my shop and it works very well, but I found that it took a long time to fill and created a lot of heat and noise. A smaller system made sense for my projects. This design was from Thingiverse and was a very...
Finally did it...I should have made this as my first CNC project.
Link to the commercial version: www.suckitdustboot.com
My design is based on this one.
Want to see more of me?
Follow me on Instagram: https://instagram.com/marius.hornberger/
Want to he...
I have been working on the grocery bag storage in the pantry. I made a bar for holding the cloth grocery bags and a pair of boxes for holding the paper and plastic bags that we accumulate. The bar for the cloth bags comes apart and is easily threaded into...
Since its founding in 1892, This Old Tony's gotten quite a few requests for a basic CNC video. Here it is.
PROS: It's Basic!
CONS: It's Basic!
That said, for the CNC newcomer, there's a lot packed into 14 minutes. You may want to watch at 1/4 speed....
66 - Extreme Torsion Box Assembly Table Part 4 Final Outfeed & Multifunction Workbench w Storage
Complete set of 3D Plans in All sizes are available through this link;
I have added a 4 foot extension kit to my CNC Router Parts CNC router table. It consists of 2 more legs, two 4 foot sides, and their accompanying linear rail and rack gear. There is also one more section of cable tray. The purpose of the extension is th...
Cnc router cutting aluminium 6061
Step clamps made of 10mm and 12mm thick Aluminium.
Machining with Artcam pro 9.
Tools 6mm single flute endmills.
Phuc Nguyen DIY | CNC...